![]() ![]() ![]() My network is password-protected and I believe my neighbor's isn't. I know this isn't a "technical" answer, but hopefully it will help! Recommend setting a WEP password on the network and determining if your neighbor's network is password protected as well (if it isn't, your laptop may be trying to connect to it instead, and then recieving errors when tryng to return to yours). Is your network password protected? Is your network at the top of the list in your laptop's "preferred" networks? Sometimes my PowerBook will try to connect to my neighbor's network, and then when I try to reconnect to mine, I have similar problems. Please, can anybody give me any ideas on what to do next? And I know my neighbor has a network, but his is on channel 6 and mine is on 10. The phone company guy suggested it was my ISP's fault, but given the base station's inability to be accessed when these gray-outs happen, I have my doubts.įor what it's worth, the gray-outs appear random but do tend to happen in the evenings. I upgraded the firmware as of last night, but this problem has been going on for a few months now. The only way to get the Airport working again is to unplug the AE by hand (since you can't access the base station via the network), wait a few seconds, and start it up again. (In fact, the base station does not even appear when you go to the Admin utility.) I plugged the cord back into the Airport and looked again at my laptop-again, no ability to connect to my base station. I did NOT reset the modem in this experiment. I started my desktop up and the network was there, working. In my latest test, when my network grayed-out, I took the Ethernet cord off the Airport and plugged it directly into the desktop computer, completely cutting the Airport unit out of the network loop. The error I will get then is that I'm not connected to the Internet. My desktop is attached to the base station via Ethernet (it lacks an Airport internal card) when the network goes down like this, the desktop's Net connection will go down, too. I then decided to test the Airport unit itself. They sent out a guy to measure my data strength on my lines and I'm getting very high data flow straight to the modem. The phone company had me change my filters on my lines, suggesting the problem was interference. Initially, I thought this was a problem with my DSL provider (my phone company), since back in the stone ages of DSL, one would have to do a modem reset every half-year or so. I see no indicators of dropped activity on my ADSL modem, either. On the base station itself, the center light is lit and solid. What happens is this: I'll be working on my laptop, my Airport reception lines will gray out, and any efforts to rejoin the network will be met with a long delay, then "error joining the network." (For the record, I am mostly using a 10.4.8 OS X iBook G3, a desktop iMac G4, and a couple other computers in the house.) This network failure will affect every computer on our house network, and will happen no matter which computers are online (it could be-and often is-just me online). 72 hours without a physical reset of the Airport Base station is now a miracle. I'm going gray from this problem, so I hope you Mac gods can help me.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |